Audio Codecs (Sound Cross)

SoundCross has 2 two-way channels, and uses the apt-X® algorithm.
It is used for the high-quality transmission from a studio, outdoor broadcasting and other kinds of broadcasting.
It is a separated audio codec device to relay digital or analog audio broadcasting signals.
It is a digital/analog audio codec device which is connected to a circuit of stereo digital audio or analog audio, condenses it into a digital signal, and transmits the digital signal to a long-distance emitting device, and vice versa.

SoundCross Features

• The bandwidth of its audio signals supports from 10Hz to 22.5kHz, and the data transmission speed is between 64kbps and 576bkps.
  
• It can use a spare port when the primary port is malfunctioning.
  
• It uses the analog signal or the AES/EBU signal, selectively.
  
• Every function can be set up using the front panel.
  
• It can control or monitor a few devices using the Ethernet port.
  
• It has a function of Back-light ON/OFF on the front panel.
  
• It can control the receiving level at the analog receiver.
  
• It has a function of Fan ON/OFF.
  
• It can control the volume of the headphones.
  
• It has a function of test-tone emission.
  
• It has a function of TPG emission.
  
• It has a function of Audio and Network loop test.
  
• It has a function of generation audible signals.
  

Technical Specifications

Back Panel View

General Application